Essential Oil Distillation Apparatus,1000ml Lab Glassware Kits Water Distiller Purifier with Condenser Pipe Water Pump for Home, Laboratory

DescriptionThis is a set of professional DIY distillation equipment for pure dew making, essential oil extraction, and distilled water making. The glassware is made of high borosilicate glass res-ista-nt to 300°C, which can be heated directly over an open flame and can withstand the typical laboratory thermal changes of chemical processes such as heating and cooling. This distillation set, which includes beakers, an iron stand, distillation flasks, and other professional equipment, can meet your various experimental needs.Details Asbestos Netting: Asbestos netting can disperse the heat so that the container is heated evenly to prevent an exp-losion, which improves the safety of the experiment.Frosted Bottle Mouth: The frosted bottle mouth provides a good seal for the product to prevent od-or emission and improves the distillation quality and efficiency.Essential Oil Bottles: Two essential oil bottles are convenient for storing extracted essential oils to reduce volatility.Al-cohol Lamp: The al-cohol lamp is convenient for heating the flask. Multiple al-cohol wicks are easy to replace and use over time.Water Stopper Clips: The water stopper clip for you easily stops the water without manual clamping to free your hands, which makes the operation easier.Brush: The brush allows you to thoroughly clean the glassware without leaving any dead spots.ApplicationThis product is suitable for distillation, fractional distillation, separation, purification, and synthesis at home, laboratory, etc.Rose Pure Dew Refining1. Prepare 100g/0.22pounds of rose petals and 200ml/6.76oz of water ( if you want to extract more concentrated dew, you can add more petals with less water), then put it into a container, add a little salt, and stir them.2. Use a match (not included) to light the alcohol lamp and wait a few minutes (the alcohol lamp will heat more slowly) for the water to boil and the roses to lighten in color.3. Distillation of steam into the condenser tube tail pipe outflow, pure dew production success.Essential Oil Refining1. Check if the funnel is leaking.2. Pour the mixed liquid into the funnel, place the funnel on the iron ring and let it stand.3. Open the piston of the separating funnel, then open the cork so that the lower liquid (water) is released from the lower end of the separating funnel, and close the cork when the oil-water interface is tangent to the top of the cork.4. Use the glass dropper to remove the essential oil.SpecificationMaterial: High Borosilicate Glass, Iron, Latex, Rubber, PlasticColor: ClearAssembly Required: YesDistillation Flask Capacity: 1000ml/33.81OZBeaker Capacity:100ml/3.38OZ, 250ml/8.45OZPear-shaped Dispensing Funnel Capacity:100ml/3.38OZAl-cohol Lamp Capacity:150ml/5.07OZConical Flask Capacity: 250ml8.45OZEssential Oil Bottle Capacity: 30ml/1.01OZSyringe Capacity: 10ml/0.33OZHeight of Iron Stand: 50cm/19.68inGlass Dropper Length: 15cm/5.9inAsbestos Net Diameter: 12.5cm/4.92inPlastic Funnel Diameter: 6cm/2.36inRubber Stopper Type: No. 5 Single HoleGross Weight: 4.45kg/9.81lbsNet Weight: 4kg/8.81lbsPackage Size: 56*38*23cm/22.04*14.96*9.05inPackage Included1*Alcohol Lamp1*Distillation Flask1*Serpentine Condenser2*Beakers1*Conical Flask1*Pear-shaped Funnel 2*Essential Oil Bottles1*Thermometer1*Glass Dropper1*Asbestos Mesh1*Plastic Funnel1*Tripod1 Pair*Gloves1*Syringe1*Flask Brush1*Latex Tube1*Rubber Stopper1*Water Stopper Clip1*BracketAll Accessories Needed for UseNotes1. Before using this product, please fix the iron frame base with nuts, then adjust the position of the iron frame and iron clamp, and connect the distillation flask and condenser tube.2. Position the sink higher than the plane of the condenser tube, then inject about 30 ml of water into the condenser tube from the inlet tube with a syringe.3. Connect the latex tube conduit and loosen the outlet latex tube stopper clip, water will flow out automatically (siphon phenomenon principle).4. Please note that the position of the mercury ball in the thermometer should be at the same level as the bottom of the nozzle and the liquid in the distillation flask should not exceed 2/3 volume or be less than 1/3 volume.5. The heating temperature should not exceed the boiling point of the highest substance in the mixture.6. Put a small number of broken porcelain tiles in the distillation flask to prevent the liquid from boiling.7. The position of the mercury ball of the thermometer should be located in the same horizontal line as the lower end of the branch pipe mouth.8. The cooling water in the condenser pipe enters from the lower port and exits from the upper port.

• ★【Quality Materials】 The glassware in this kit are made of high-quality high borosilicate glass, while the stand is made of high-quality iron. These high-tem-perat-ure-re-sist-ant and high-hardness materials make this product strong, durable, and not easily damaged.
• ★【High Safety】 Low expansion rate, fire re-sista-nce, high-temperature res-ista-nce, and cor-ros-ion res-ista-nce of high borosilicate glassware is not easy to bl-ow up in the temperature of sudden changes and can hold a variety of experimental materials.
• ★【Stable Structure】 It uses knob adjusters to firmly fix the bracket, flask, and condenser, so as to prevent the joint from separating during the reaction process and keep it stable.
• ★【Large Capacity】 The product range includes flasks with a capacity of 1000 ml/33.81 oz, beakers (capacity 100 ml/3.38 oz and 250 ml/8.45 oz), separating funnels (capacity 100 ml/3.38 oz) and conical flasks (capacity 250 ml/8.45 oz).
• ★【Accurate Measurement】 The product comes with a glass dropper, thermometer, and syringe, so you can precisely control doses, measure temperatures, and observe experimental changes for more optimal results.